|
|
Built
on a high strength chassis it withstands the very
worst working conditions.
The
parts in contact with the fertilizer - discs and
distribution blades, dosage plate and bolts -
are all of stainless steel.
The chute of the models up to
1500 lts is made of polyester and fibreglass,
of high resistance and total guarantee against
corrosion produced by the chemical agents. In
the big capacity models 200 and 2500- it is made
of metal with special coverings to endure the
action of fertilizers and weather conditions for
a long time.
Disassembly for cleaning is
very simple, the simple access to the regulation
mechanisms and the simplicity of its use make
the fertilizer distribution task an easy-going
activity.
In a simple way and without
taking any time the machine can be regulated to
accurately distribute any type of granulated fertilizer
at the desired width.
The
small details make our machinery the perfect tool:
|
|
|
|
With the 2000
and 2500 lts capacity models
we achieve maximum profitability
of the fertilizing task.
The chassis
is specifically designed so as
to withstand heavy loads of fertilizer
and at the same time long trips
with the chute full.
It has an interior
sieve, that can be disassembled
in halves, so as to prevent any
object from entering the distribution
group causing breakdowns.
 Click
to increase size
|
|
|
|
|
|
|
|
|
|
|
| With
the help of this deflector and
with a simple adjustment to the machine,
we achieve perfect fertilisation of
the edge of our plot of land without
any fertiliser losses. |
|
|
|
|
|
|
 |
|
|
|
|
| All
the models have a sieve available to
prevent access to the distribution group
of undesired objects or fertilizing
lumps that may damage the machine or
alter the distribution. The user can
rapidly carry out its assembly and disassembly. |
|
|
|
|
|
|
|
|
|
|
|
In
order to control the amount of fertilizer
there is a millimetric index available
allowing us to precisely obtain the
required dosage. Aperture of the
fertilizer valve from the chute to the
distribution discs is carried out by
the operation of two cylinders than
can operate individually in order to
distribute on one or both sides of the
fertilizer machine. A simple controller
is required in the tractor for said
purpose.
A security valve is included
so as to prevent undesired emptying
of the chute due to a breakdown when
the hydraulic distributor in the tractor
allows the entering of oil from the
machine. |
|
|
|
|
|
|
|
|
|
|
|
|
By inclining
the blades and selector of
the point of descent of the fertiliser
to the spreading disc:
12, 15, 18 and 24 meters wide. - Granulated
12, 15 and 18 meters wide. - Urea
12 and 15 meters wide. - Urea fine
grain
|
|
|
|
|
|
|
|
|
|
|
|
|
Optionally
we have available an assisting device
of marking the area we are fertilizing.
This electric foam marker leaves
on the track we have been working
on foam that serves us as a guide
for the next distribution at the separation
decided upon (12, 15, 18, 21 and 24
mts.).
|
|
|
|
|
|
|
|
|
|
|
|
|
Allows distribution
of the programmed dosage for the whole
of the piece of ground, even with
farm tractor speed variations. Its
controller regulates the quantity
of fertilizer fed from the chute to
the distribution discs so as to maintain
the desired Kgr/Ha rate at all times.
It regulates
the distribution on the sides of the
piece of ground; controls the revolutions
of the tractor auxiliary drive shaft;
allows increases and decreases of
the fertilizer dosage in keeping with
the user's requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
Personalised
small boxes are available to assist
us when calibrating our fertilizer
machine, used for fertilizer calibration;
with these and the instruction manual
a simple and precise adjustment
can be carried out.
|
|
|
|
|
|
|
|
